A Division of Bladewerx LLC

If you feel the modifications you need can't be done in-house, give us a call for a quote on custom work.

SWX-215 Lithium-Poly Cylinder Assembly

SWX-237 Boron-Silicone Reactor Rod Pipe Shields

Custom Products

Unique problems often require unique solutions.  While most of our shielding products can be cut to size, or shaped using conventional woodworking tools, some solutions require special molds or material shapes not easily made from sheets or rods.  Our CAD designers and machine shop techs can produce custom molds that allow material casting to customer specifications, or allow milling or turning of most of our polyethylene-based neutron/gamma shielding materials.

SWX-201 Boron-Poly Cylinder Assembly

Nested Cylinder Assembly:

Poly-Bismuth, Cadmium and Pure Poly

Pipe Shield Assembly:

SWX-210Z Boron-Bismuth-Poly segments

SWX-227 Flexi-Boron pipe sizing sleeves

SWX-201 Boron-Poly

Small Cask Assembly

To fill the need for shielding unconventional gaps and areas in fire-rated rooms, we designed a type of "Sand Bag" to cover exposed streaming paths.  The bags could be used to cover floor hatches, surround pipe openings, or block door gaps.

The bags are made of a silicone-coated fiberglass fabric. Not only is it water-, oil-, and puncture-resistant, it has a maximum temperature of 500°F.  The thread is Kevlar based and also flame resistant with a max temp of 600°F.  When laid flat, the standard bag size is 19" x 16" x 2", but could be custom sized if required.

Each "Sand Bag" is filled with 10 pounds of our popular SWX-201HD in pellet form.  The pellets are a high density polyethylene with 5% boron content. Because of its high boron content, type 201HD shows excellent attenuation of thermal neutrons and significant reduction of capture-gamma dose.  Fast neutrons are shielded by the very high concentration of hydrogen (96% that of water).  If no boron is needed, the bags can instead be filled with SWX-213, pure poly pellets.

To shield an entire floor, normally you would use standard Poly-based sheets.  However, when fire safety is of the utmost concern, our custom designed "Floor Tiles" are recommended.  Each tile is a completely sealed Aluminum shell filled with our castable shielding material SWX-237.  The tiles are normally 12" x 12" x 3" in size, but any thickness from 1" to 4" could be accommodated.  When installed, the flooring system offers almost complete shielding coverage, with a maximum allowable gap between tiles of only 1/10-inch.

The SWX-237 shielding material, 1% Boron-Silicon, is a fire-resistant, heat-resistant, cast elastomer with a high hydrogen content (67% that of water). It will withstand temperatures up to 400°F (205°C) for extended periods while retaining 97% of its hydrogen.  Boron-Silicon contains 1% boron for thermal neutron capture and the suppression of capture-gammas.  Its density is 1.59 g/cc (99 lbs./cu ft), so each tile weighs approximately 25 pounds.

Often times a facility imposes fire restrictions in certain areas, which can make it difficult to find the materials necessary to perform the shielding required.  Shieldwerx offers a variety of products that are fire-rated for such circumstances.

Perfect! Can't wait to show my boss!

Get a quote for custom work

with a quick

Pricing Request

Need more ideas?

Give us a call at 505-892-5144

to speak with a shielding engineer

Not what you were looking for?

Return to the Products page

to view our other offerings.

Contact Us

Photo Credits

Copyright © 2006-2015, Shieldwerx, a division of Bladewerx LLC, All Rights Reserved

4529 Arrowhead Ridge Dr. SE

Rio Rancho, NM 87124

United States